All data is for information only------(Home)
PRODUCT DATA of Hastelloy X
MaterialHastelloy X
Product DatasheetHastelloy X
General InformationHastelloy X is a nickel-base alloy used for combustor-liner parts, turbine-exhaust weldments, afterburner parts, and other parts requiring oxidation resistance and moderately high strength above 788 C. It is not hardenable except by cold working and is used in the solution-treated (annealed) condition. Hastelloy X is available in all the usual mill forms.
Chemical Composition Ni-22Cr-18Fe-9Mo-1.5Co-0.6W
Name of ManufacturerHaynes International, Inc
1020 West Park Avenue, P.O. Box 9013, Kokomo, Indiana 46904-9013 (USA)
1-800-354-0806 or (765) 456-6012
(765) 456-6905
www.haynesintl.com
PHYSICAL PROPERTIES
Specific Gravity8.22
Magnetic PropertiesFerromagnetic
Relative Permeability1
ELASTIC PROPERTIES
Tensile Modulus205 GPa
Data Quality: Manufacturer's data
Shear Modulus77.9 GPa
Poisson Ratio0.32
ELECTRICAL PROPERTIES
Electrical Volume Resistivity0.00000118 ohm.m
THERMAL PROPERTIES
Thermal Conductivity10.4 W/m.K
Thermal Expansion Coefficient13.7 μstrain/°C
Specific Heat0.481 J/g.K
Melting Range1260 to 1310 °C
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
Stress Corrosion StatusHigh Resistance to SCC: Table 1
Data Quality: Design Data
Bimetallic CorrosionCan be connected without any restriction to: 400 series Stainless steel
Can be connected in a non-controlled environment to the above and 300 series stainless steel, Ti and Ti-alloys, Cr, Cu, brasses, Cu-Ni, Al-bronzes, Si-bronzes,
Can be connected in a clean room environment to above and Ag, SnPb alloys, Sn, Pb, low C steel, Al-Cu alloys, Cd, Au
Needs specific measures: All others
Test:ECSS-Q-ST-70C Rev.1 Table 5.1
Data Quality: Design Data